The BYTE Is The Grand Prize Winner Of The 2020 Hackaday Prize

The BYTE Is The Grand Prize Winner Of The 2020 Hackaday Prize

The BYTE, an open-source mouth-actuated input device for people with physical challenges has just been named the Grand Prize winner of the 2020 Hackaday Prize. The award for claiming the top place and title of “Best All Around” in this global engineering initiative is $50,000. Five other top winners and four honorable mentions were also named during this evening’s Hackaday Prize Ceremony, held during the Hackaday Remoticon virtual conference.

This year’s Hackaday Prize focused on challenges put forth by four non-profit partners who have first hand knowledge of the problems that need solving as they work to accomplish their missions. These organizations are Conservation X Labs, United Cerebral Palsy Los Angeles, CalEarth, and Field Ready. Join us below for more on the grand prize winner and to see the Best in Category and Honorable Mention winners from each non-profit challenge, as well as the Best Wildcard project.

Over $200,000 in cash prizes have been distributed as part of this year’s initiative where hundreds of hardware hackers, makers, and artists competed to build a better future.

The BYTE is the Grand Prize winner of the 2020 Hackaday Prize. This responsive hands-free interface is affordable, versatile, and will be life changing for people who have limited or no mobility for using traditional input devices. The BYTE has a tongue sensor for directional movement and a pressure sensitive bite sensor for selection input.

At first glance this is a computer mouse you can put in your mouth. Since the jaw and tongue are core motor functions in humans, many people who have limited or no control over other parts of their body still retain great mobility in their mouth. Being otherwise unable to affect the world around them, mouth-based interfaces have been transformative.

The BYTE goes far beyond the utility of traditional sip-and-puff interfaces by internalizing the joystick functionality using tongue pressure, converting the air pressure-based input to bite control, adding a vibration motor for haptic feedback, and implementing advanced control options in how the sensors can be used. Light bite pressure and directional input (we’ll call that d-pad for short) moves the mouse, firm bites are clicks, even pressure on the d-pad is mapped as custom input as is a long bite, and pressing up or down on the d-pad without a bite will scroll.

The BYTE’s input sensors have been designed to fit inside of an adult-sized pacifier nipple, readily available at low cost and safe to have inside your mouth. The wire that snakes out ends in an RJ45 phone jack to interface with a small board that converts the signals to a USB connection. While a number of 3D-printed parts have been used in the prototype, these would be easy to injection mold as part of a volume manufacturing run.

The United Cerebral Palsy Los Angeles design brief for the 2020 Hackaday Prize specifically called for new designs of trackballs or joysticks that could be made affordable and open source, and be a tool for greater independence in the lives of those with physical challenges. The well-engineered design of the BYTE fulfills those goals and is a deserving recipient of the grand prize. Congratulations!

Conservation X Labs Prizes:

Field Ready Prizes:

Best in Category: UVA

Rapid manufacturing and repair is an important part of disaster recovery. Ultraviolet-curable adhesives are often used in traditional manufacturing, this project provides a powerful and affordable UV curing wand for use in the field. Even at the small scale of prototyping it looks to lower the cost of traditional tools by up to five times. Prize: $10,000

United Cerebral Palsy Los Angeles Prizes:

CalEarth Prizes:

Best Wildcard:

PolySense: Augmenting Materials with Electrical Properties

The Wildcard category is for projects that are worthwhile but that didn’t address one of the specific challenges outlined by our non-profit partners this year.

What if you could turn any textile or porous material into a sensor? That’s the question asked and answered by the PolySense project that uses piezoresistive dye to build sensors from textiles. This could be shirts and pants, scraps of fabric, paper, or many other materials. Using traditional dying techniques like tie-dying, different areas can perform specific sensing tasks. Prize: $5,000

Spectacular Accomplishments During a Very Difficult Year

Congratulations to all who entered the 2020 Hackaday Prize. It has been an incredibly difficult year as tragic loss of life and suffering caused by the coronavirus outbreak swept the globe. What it has proven is that we are stronger together, working to help one another whenever and wherever possible. This outbreak is among the many challenges facing humanity. Seeing so many entries of the Hackaday Prize striving to provide better independence for the physically challenged, more access to housing and infrastructure for those in crisis, and answers to pollution and climate change are beacons of hope.

Thank you to all who entered, to our expert judges and mentors, and to the staff at our non-profit partners. Dedicating your time and talent to these issues leads the way. It sets the example for others to follow, and builds on a movement throughout the world of people and initiatives working to solve hard problems, and that’s something that really matters.